

Overview
At self-storage sites, renters often visit outside office hours, and a single visit may take them through a vehicle gate, a shared corridor, and an individual storage unit. Staff also need to manage short visits by moving crews and service contractors. As rentals begin, change, or end, operators need to keep permissions up to date across all relevant entrances.
A self-storage access control system links credentials to the entrances, storage units, and access hours assigned to each user. Operators manage permissions and review access activity through a central platform, while CIVINTEC access control terminals verify credentials at each entry point. This helps renters reach their assigned units without waiting for staff and gives operators a clear way to withdraw access when a rental ends.
As renters move in, switch units, or end their leases, staff need to keep access permissions up to date across shared entrances and individual storage units. CIVINTEC terminals support Ethernet (PoE), Wi-Fi, 4G, and LoRaWAN, helping operators link terminals to their cloud platform, where staff can manage permissions and review access activity from one place.
· Staff issue credentials at move-in and define which entrances and units each renter may use and when. They adjust permissions when a renter changes units, grant temporary access to moving crews, and revoke access to vacated units at move-out. Staff also review access records across connected entry points to investigate reported issues.
· To support "Always-On" access, CIVINTEC access control terminals continue to verify credentials against locally stored permissions and record access events during a network outage. When the connection returns, stored logs sync automatically with the platform.
· CIVINTEC supports remote OTA software and firmware updates, allowing terminals to be updated without visiting each device. This reduces on-site maintenance time and operational costs.
From everyday renter access to temporary entry for move-ins and service visits, self-storage operators need flexible credential options for different needs.
Facial Recognition:At self-storage entrances, facial recognition offers hands-free entry, especially useful when renters are carrying boxes. Built-in liveness detection helps resist photo and video spoofing, and the system accommodates common changes in appearance, such as wearing glasses. Authentication takes 0.015 seconds at a range of 30–150 cm, so there' s no need to set boxes down to reach for a card or phone.
RFID Cards:For renters who regularly drop off or pick up belongings, one assigned card provides access through the site entrance and to the units they' re authorized to use. If a renter switches units, staff can update the card' s permissions through the management platform without issuing a new card.
NFC/BLE Mobile Credentials:For routine trips to drop off or pick up belongings, renters can use a compatible smartphone at the site entrance and the storage unit doors they' re authorized to open. This gives them a convenient way to come and go without carrying a separate access card.
QR Codes and PINs:Before a scheduled move-in, staff can send the moving crew a time-limited QR code. The crew scans it at the designated entrance during the booked window, so there' s no need to hand over an access card when they arrive.
PIN Codes: If renters don' t have their access card or can' t use their phone, staff can set up a dynamic PIN through the management platform. Renters enter the PIN at the keypad for temporary access to the entrances and storage units they' re authorized to use.
Renters may stop by to pick up or drop off belongings after the office closes. Access records help staff look into entry issues, while alerts notify them of situations that need attention at entrances outside staffed hours.
Access Logs and Image Records: CIVINTEC access control system logs access attempts at site gates and storage unit doors. Each record shows the credential used, the access point, the time, and whether access was granted. During RFID card or QR code authentication, terminals with a built-in camera can capture a photo and link it to the corresponding record. These records can support incident investigations and help resolve access-related disputes.
Tamper and Door Alerts:A terminal can raise an alert if someone tries to pry it off its mount. An external door sensor also allows the terminal to flag a door that stays open past a set time, such as a shared entrance left ajar after a move-in.
Anti-Passback:At self-storage sites where renters scan their cards on entry and exit, the system checks the card' s last recorded use. Once a card has been used to enter, it cannot be used to enter again until it has been scanned at the exit. This helps deter card passback and repeated entry using the same credential.
Fire Alarm Integration: Where access control is linked to the building' s fire alarm system, a fire alarm signal can automatically release designated door locks to help people exit when a fire is detected.
CIVINTEC access control devices are offered with a robust SDK for seamless customer server software integration and allow for personalized products based on user preferences. The device with display features a clear, responsive interface with a fully customizable UI — including personalized text, icons, and background images, audio files, etc.
· Provide SDK for server management software integration
· Tailored User Interface
· OEM LOGO display
CIVINTEC access control terminal is designed with versatile GPI/O port and interfaces to build comprehensive security and IoT access control solutions featuring less wiring and cost-saving installation.
Centralized Network Management
CIVINTEC wired and wireless HTTP/HTTPS networked access control terminals operate over WiFi, LoRaWAN, 4G LTE (GPS) and Ethernet (Power over Ethernet) for less wiring and cost-saving installation, connectivity to manage both online and local mode access control applications. This ensures seamless operation in any environment, even those with limited or no local network access.
High-Security Access Solution Tailored for Crical Areas
CIVINTEC access control system supports APB (anti-passing back) external door reader via Wiegand/RS485 interface to protect both sides of an access point. It can be intelligently configured into a slave mode for entrances, while operating seamlessly with room interior relay-enabled card readers for exits.
Intelligent Access and Facility Control
CIVINTEC access control terminals with rich I/O ports to seamlessly work with external devices enabling smart lock control, door contact monitoring, exit button, and fire alarm. Equipped with multiple relay outputs, CIVINTEC smart IoT & access control system is ideal for centralized remote management of electric locks, lighting, and other facilities from a central server in real time.

